Jump to a key chapter
In chemistry, a dilution is the process of reducing the concentration of a solute in a solution. Dilutions are used in chemistry to get a certain amount of the desired reagent.
First, we’ll go over what a dilution is.
Next, we’ll learn about how to use the dilution formula.
Then, we’ll read about the types and methods of dilution.
Lastly, we’ll learn to calculate dilutions in chemistry.
Dilution Definition
Let's start by looking at the definition of dilution.
Dilution consists of adding solvent to a solution to lower its concentration.
A solute is a substance that dissolves into a solvent.
A solvent is a substance into which the solute dissolves, resulting in a solution.
Typically, a solute is a solid substance and a solvent is a liquid.
Solutions are homogeneous mixtures or mixtures with a uniform composition.
A concentrated solution is one that has a significant amount of solute dissolved into it when compared to a diluted solution.
A diluent is a substance that we use to dilute a solution.
For more detailed information regarding concentrations and solutions, please reference our article “Concentration.”
Concentration and dilution, although related, are different concepts. The term "concentration" refers to the amount of solute that is present in a given quantity of solvent or solution. Concentration is often expressed in terms such as molarity (moles of solute per liter of solution), molality (moles of solute per kilogram of solvent), or mass percent (grams of solute per 100 grams of solution).
Dilution, on the other hand, refers to the process of reducing the concentration of a solute in a solution, usually by adding more solvent.
In the figure above, from left to right, the solution gets more diluted, meaning that the amount of solute dissolved into the solution is significantly less when compared to a concentrated solution.
Dilutions involve the addition of a solvent, leading to a less concentrated solution. In contrast, increasing the concentration of a solution means adding more solute.
You can also concentrate a solution by removing solvent. This is usually done by boiling or evaporating the solvent. Keep in mind, that this only works if the solute is not affected by the heat used to boil off/evaporate the solvent.
Figure 2: Solution formation shown.
The solute is typically solid. While the solvent is what the solute dissolves in, and together they form a solution.
Calculating a Dilution: the Dilution Formula
The dilution formula is:
\[M_1V_1 = M_2V_2 \]
Where
\(M_1\) = concentration in molarity (mol/L or M) of the concentrated solution we start with.
\(V_1\) = volume (mL or L) of concentration solution we start with.
\(M_2\) = concentration in molarity (mol/L or M) of the diluted solution we end with.
\(V_2\) = volume (mL or L) of diluted solution we end with.
We use the dilution equation to figure out the amount of solvent needed to dilute a solution. We usually dilute a solution by mixing more solvent into the solution.
For example, adding water to a drink like lemonade or apple juice means we are diluting the drinks down.
How is the Dilution Formula Derived?
To derive the dilution formula above (\(M_1 V_1 = M_2 V_2\)), we start with the mole concentration formula, which is used to calculate the concentration of a given solution.
Figure 3: Mole concentration formula shown above relates to our dilution formula.
Solving for the number of moles of solute for the equation above gets you:
Simple Dilution Formula:
\[\text{moles of solute (n)} = [\text{Mole concentration or Molarity (M)}] \cdot [\text{Volume of Solution (V)}]\]
The product of the number of moles of solute times the volume does not change before and after a change in concentration; therefore we can write the equation as:
\[M_1V_1 = M_2V_2 \]
which means that the product of the number of moles times the volume, of the initial solution before dilution, is equal to the product of the number of moles times the volume of the final solution after dilution.
Types and Methods of Dilution
Above, we introduced the dilution formula: \(M_1V_1 = M_2V_2\). We use this equation when we want to make a fixed amount of a dilute solution from a stock solution.
Within chemistry, a stock solution is usually a large volume of a reagent that’s going to be diluted down in concentration for usage.
This type of dilution is often called a simple dilution which was shown above. Other types of dilution include:
Serial Dilution: A serial dilution is a series of stepwise dilutions where the dilution factor is kept constant at each step. A small amount of the initial concentrated solution (stock solution) is added to a larger volume of solvent, mixed, and then this process is repeated with each subsequent dilution.
Gravimetric Dilution: In a gravimetric dilution, a precise amount of a substance is weighed and then added to a solvent to achieve a specific concentration. This method is often used when high accuracy is needed.
Volumetric Dilution: In a volumetric dilution, a certain volume of a concentrated solution (the aliquot) is transferred to a new container and more solvent is added until the total volume reaches a predetermined level. This is typically done using precise volumetric glassware like pipettes and volumetric flasks.
Dilution of Solutions with Gases: For gases, dilutions are often carried out by introducing a known volume of the gas into a larger container and allowing it to mix with the rest of the gases present.
Serial Dilutions
Serial dilutions are usually performed in the lab. From left to right as shown in the illustration below, we’re diluting down by a 1:10 ratio each time. We find the dilution factor by adding 1 mL sample over 9 mL of diluent plus 1 mL of sample, giving you a 1:10 ratio.
We can see that every time we dilute down by a factor of 1:10 the number of colonies of bacteria in the lab decrease. This is useful to do to be able to estimate the concentration of the number of bacteria/colonies of an unknown sample.
Serial dilutions are performed typically to avoid having to pipette very tiny amounts of liquid to make a specifically required dilution, as measuring such low volumes comes with a high error rate.
Figure 7: Serial Dilutions explained.
To perform a serial dilution, we just need to:
Take a sample and dilute it through the same volumes of diluent, which, in the case of microbiology, is usually either distilled water or 0.9% saline solution.
The greater the concentration of bacteria there is in a sample, the higher your dilution factor should be. For example, if a sample has 500 colonies, then a 1:1000 dilution would be preferred over a 1:10 dilution.
As shown above, serial dilutions can be either calculated from one tube or by adding up the total number of tubes. For instance, the first tube has a 1:10 dilution, which we get by adding 1 mL sample over (9 mL of diluent + 1 mL of the sample). In contrast, we get the third tube’s dilution by multiplying the previous tube dilutions by it, or 1:10 × 1:10 × 1:10= 1:1,000.
Dilution Factor
Dilution factors are used in serial dilutions. This type of dilution occurs when we dilute a stock repeatedly.
The dilution factor is a measure of how much a solution has been diluted. It is the ratio of the final volume of the solution to the initial volume of the solute.
We can dilute a stock successively and calculate the dilution factor with the following formula:
\(DF = \frac{V_f}{V_i}\)
where, the initial volume (stock solution) is, Vi, and the final volume (stock solution plus diluent volume) is, Vf.
Given the dilution factor, DF, we can find each successive dilution will be given by:
\(V_i = \frac{V_f}{DF}\)
For example, let's say that we pipette 2 mL of a stock solution into 8 mL of buffer (diluent). Notice that the final volume, Vf, would be, 2 mL (stock solution) + 8 mL buffer (diluent) = 10 mL. Then the dilution factor, DF, will be given by:
\(DF = \frac{10 mL}{2 mL} = 5\) which means that we diluted the stock solution by a factor of 5.
The dilution factor is often used in the denominator of a ratio. In the example that we just used the dilution would be 1:5. Now let's say that we want to create 100 mL of a 1:50 dilution of the stock solution. We calculate this by using the equation:
\(V_i = \frac{V_f}{DF} = \frac{100\,mL}{50} = 2 mL\)
Thus, you would pipette 2 mL of the stock solution into a 100 mL volumetric flask and then you would diluent (buffer) to the mark on the volumetric flask, (that is you will have added 98 mL of buffer to the flask).
Uses of Dilutions
Dilutions have a wide range of uses across various scientific and industrial fields. Here are some key examples:
- In a research context, if the concentration of a substance in a solution is too high to be accurately measured, the solution can be diluted to bring it into the measurable range of a spectrophotometer or other analytical instruments. In molecular biology, dilutions are used in various laboratory procedures such as PCR, ELISA, and in the preparation of samples for gel electrophoresis.
- Dilutions are often used in the preparation of medications. For example, a very concentrated drug might be diluted to the appropriate strength before administration to a patient.
- In microbiology, dilutions are often used to weaken the concentration of bacteria or viruses to make them easier to count or test.
- In serology, scientists dilute down antibodies to the lowest concentration that still produces a signal.
By adjusting the concentration of a substance, scientists, doctors, and manufacturers can ensure they're working with an appropriate and safe level of that substance.
Examples of Dilution in Chemistry
Now, let's look at some examples of dilution in chemistry.
You are in science class, and you have a stock solution of 30 mL of 1 M NaCl. The teacher tells you to dilute it to 50 mL by adding water. What’s the final concentration after dilution?
The answer is simple, use our simple dilution formula and follow the steps shown below:
Figure 5: Simple dilution formula.
And we start with a stock solution of 30 mL of 1 M NaCl
So \( M_1 = \) 1 M of \(NaCl \) and \( V_1 = 30 mL \) of \( NaCl \) solution
We end up with 50 mL solution which means \( V_2= 50 mL \) and we're trying to find \( M_2 \).
Since we're solving for \(M_2 \) then we can rearrange the simple dilution formula equation to:
Figure 6: Simple dilution formula with a worked-out example.
So, our final concentration is 0.6 M for our solution.
Another interesting question to ask might be what's the amount of solvent we added?
In this case, the answer is simple we just subtract 50 mL by 30 mL and we get 20 mL. This means we added 20 mL of solvent to the solution.
Dilution - Key takeaways
Dilution is the process in which the concentration of a solution is lowered by the addition of more solute.
A concentrated solution is one that has a significant amount of solute dissolved into it when compared to a diluted solution.
A diluent is a substance that we use to dilute a solution.
There are 2 main types of dilutions: simple and serial.
References
- Basic Practical Microbiology-Manual. The society of General Microbiology.
- Libretexts. (2022, June 12). 11.4: Dilutions and concentrations. Chemistry LibreTexts.
- Sapkota, A., Morg, Nafisa, Daniyal, Ogugbara, I., Manyonge, D., ferahtia_fs, Singh, D., Sawaira, Romano, D. R., Vishwathi, shah, T., Getahun, N., & Nwachukwu. (2022, May 2). Serial dilution-definition, formula, calculator, procedure, use. Microbe Notes. Retrieved June 22, 2022
Learn faster with the 5 flashcards about Dilution
Sign up for free to gain access to all our flashcards.
Frequently Asked Questions about Dilution
What is dilution?
A dilution is a process in which the concentration of a solution is lowered by the addition of more solute.
How do you calculate a dilution?
You calculate a dilution depending on if it’s simple or serial. If it’s simple, just use our M1V1=M2V2 formula and if it’s serial, then make sure to calculate the dilution factor and then perform the steps.
What is the method and importance of dilution?
Dilutions are often done in the science labs to calculate the number of colonies, viruses, or bacteria. We also perform dilutions to get an X amount of the desired reagent in a solution. The methods usually involve using tubes to control the amount we dilute.
What is the dilution factor in chemistry?
The dilution factor in chemistry is how much we dilute something by, and it’s usually written as a ratio. For example, diluting by 1:10 factor means diluting 1 mL of sample by 9 mL of diluent.
What is the equation and formula for finding dilution?
The equation or formula for finding dilutions are M1V1=M2V2 or one of the concentration formulas derived. We can also use dilution factors to figure out how much we dilute or diluted something by.
What is the equation and formula for finding dilution?
The equation or formula for finding dilutions is M1V1=M2V2 or one of the concentration formulas derived. We can also use dilution factors to figure out how much we dilute or diluted something.
About StudySmarter
StudySmarter is a globally recognized educational technology company, offering a holistic learning platform designed for students of all ages and educational levels. Our platform provides learning support for a wide range of subjects, including STEM, Social Sciences, and Languages and also helps students to successfully master various tests and exams worldwide, such as GCSE, A Level, SAT, ACT, Abitur, and more. We offer an extensive library of learning materials, including interactive flashcards, comprehensive textbook solutions, and detailed explanations. The cutting-edge technology and tools we provide help students create their own learning materials. StudySmarter’s content is not only expert-verified but also regularly updated to ensure accuracy and relevance.
Learn more